Two neighbours take a ₹50 lakh home loan in the same year from the same bank. A year later one pays a noticeably lower rate than the other, even though the repo rate moved the same way for both. The reason is usually the spread, the fixed margin the bank adds to a benchmark, and how and when each loan resets. Few borrowers read that part of the sanction letter, and it is the part that decides what the loan costs over twenty years.
A floating rate home loan is one whose interest rate moves when its benchmark moves. This guide explains how repo-linked rates (called EBLR, for external benchmark lending rate) work, what the spread and reset mean, what the Reserve Bank of India (RBI) says on resets and on switching, and what happens to your EMI or loan tenor when rates change. It covers the rules for banks as read on the RBI website in November 2026. NBFCs and housing finance companies follow their own parallel instructions, so check the current RBI text and your lender’s terms before you act.
How a floating rate home loan is priced
Your rate has two parts: a benchmark that moves, and a spread that the bank sets. Rate = benchmark + spread. If the benchmark is 5.5% and the spread is 3%, your rate is 8.5%. If the benchmark falls by 0.25%, your rate should fall by 0.25%, if the spread stays put.
Under the RBI’s Commercial Banks Interest Rates on Advances Directions of 28 November 2025, floating rate retail loans such as housing and auto loans, and floating rate loans to small businesses, must be benchmarked to an external benchmark rate. The benchmarks allowed include the RBI policy repo rate, the three-month and six-month Treasury Bill yields published by FBIL, and any other benchmark market interest rate published by FBIL. A bank must use one uniform benchmark within a loan category, and the benchmark you are linked to must be written into your loan contract.
That last point is the one to check in your own papers. Look at the sanction letter for the benchmark name, the spread, and the reset date. If you cannot find them, ask the bank in writing.
What the spread is and when it can change
The spread is the bank’s margin over the benchmark. It covers the bank’s operating cost, a risk premium for your credit profile, and profit. The RBI lets banks set the spread freely at the start, but it limits how the spread can change afterwards. The credit risk premium may change only when your credit assessment undergoes a substantial change, as agreed in the loan contract. The other parts of the spread, such as operating cost, can be altered only once in three years.
There is one exception that helps you. A bank can reduce the spread earlier, for example to keep a customer, as long as the reason is justifiable and not discriminatory.
In practice, this explains the two neighbours. One borrower may have had a higher credit risk premium at the start, because of a lower credit score, and so carries a larger spread for years. If your credit record improves, you can ask for a lower spread, and the bank may agree to cut it. Our guide on the credit score explains how to check and improve yours.
Reset: how often your rate changes
A reset is the date on which your lending rate is recalculated from the benchmark. For loans linked to an external benchmark, the RBI requires the rate to be reset at least once every three months. Banks may reset more often. Repo-linked loans therefore respond quickly: when the RBI changes the repo rate, your rate follows at the next reset date, which is often within three months.
Older loans linked to the MCLR (marginal cost of funds based lending rate) behave differently. The reset period for those is one year or less, matching the MCLR tenor the loan is linked to. The RBI says existing MCLR, Base Rate and BPLR loans can continue until repayment or renewal. So if you took a home loan years ago, you may still be on an older benchmark, and your rate may move more slowly, up and down.
| Feature | Repo-linked (EBLR) loan | Older MCLR-linked loan |
|---|---|---|
| Benchmark | External, such as the repo rate | Bank’s own marginal cost of funds |
| Reset frequency | At least every 3 months | One year or less, per the MCLR tenor |
| Spread changes | Credit risk premium only on credit change; other parts once in 3 years | Set by the loan contract |
| Transparency | Benchmark named in the contract | Depends on the bank’s internal calculation |

What a rate change does to your EMI and tenor
When the rate rises, the bank has two levers: raise your EMI, or lengthen the loan. When the rate falls, the reverse. Many lenders keep the EMI fixed and move the tenor, which is why borrowers sometimes find, years in, that the loan has stretched far beyond the original term without any change in their monthly outgo.
As an illustration, take a ₹50 lakh loan for 20 years at an assumed 8.5% a year. The EMI works out to about ₹43,391. Suppose the rate goes up to 9% right at the start and you keep paying the same EMI. The loan then runs for about 22 years and 3 months, which is 27 extra months of EMIs. If you want to finish on time, the EMI has to rise to about ₹44,986, an increase of roughly ₹1,600 a month. You can try your own numbers in the EMI calculator.
Neither route is free. A longer tenor adds to the total interest paid, and a higher EMI strains the monthly budget. If you have spare cash, a part-prepayment cuts the principal and either shortens the loan or lowers the EMI.
RBI rules on resets and borrower options
The RBI’s circular of 18 August 2023 on the reset of floating interest rates covers equated monthly instalment (EMI) based floating rate personal loans, and says its instructions apply with necessary changes to other equated instalment loans. It applies to existing and new loans, and it was updated as on 1 October 2025. Lenders follow it for most retail EMI loans, and your lender’s home loan policy may mirror it, so ask which options your loan offers.
The circular says lenders must do the following.
- At sanction, assess your repayment capacity with enough headroom for a longer tenor or a higher EMI if rates rise.
- At sanction, tell you clearly how a change in the benchmark can affect your EMI, your tenor, or both.
- Communicate any increase in EMI or tenor to you immediately through appropriate channels.
- Offer you a choice at reset to increase the EMI, extend the tenor, or do a combination of both.
- Allow you to prepay in part or in full at any time, subject to the pre-payment rules.
- Share a statement at the end of every quarter showing the principal and interest recovered so far, the EMI, the number of EMIs left, and the annualised rate of interest for the whole tenor.
Extending the tenor must not lead to negative amortisation, which means the outstanding principal must not keep growing. The lender may, at its option and under its board-approved policy, offer you a switch from floating to a fixed rate at reset. An amendment of 29 September 2025, effective 1 October 2025, made this switch optional for the lender and not mandatory. If a switch is offered, the charges for it must be disclosed in the sanction letter, and any later revision must be disclosed too.
Switching your loan to a repo-linked rate
If your home loan is still on an older benchmark, you can ask to move to an external benchmark. The RBI says existing MCLR, Base Rate and BPLR borrowers may switch on mutually acceptable terms. For floating rate term loans where the borrower is eligible to prepay without charges, the switch must be made without any charges or fees, other than reasonable administrative and legal costs. For these borrowers, the new rate must equal the rate for a new loan of the same category, type, tenor and amount at the time of the switch. The switch is not treated as a foreclosure of the existing loan.
Two practical points follow. First, ask the bank in writing for the new spread and the cost of switching, and compare it with the spread on a fresh loan from the same bank. Second, if the bank will not move you on fair terms, you can move the loan to another lender through a balance transfer, which involves a fresh processing fee and valuation. Compare the saving with those costs before deciding.
Pre-payment charges on a floating rate home loan
The RBI’s Pre-payment Charges on Loans Directions of 2 July 2025 say that for floating rate loans to individuals for purposes other than business, no pre-payment charge may be levied. It applies to loans sanctioned or renewed on or after 1 January 2026. It applies whether the prepayment is partial or full, and there is no minimum lock-in period. Charges must be disclosed in the sanction letter and the loan agreement, and a charge that was not disclosed cannot be levied.
For a home loan taken before 2026, banks were already barred from charging foreclosure or pre-payment penalties on floating rate term loans to individuals for non-business purposes, under earlier RBI instructions. The 2025 Directions repeal those older circulars and bring one rule for all lenders. Check your loan agreement to see whether it says anything different, and ask the lender to confirm in writing.
Because you can prepay without penalty, a floating rate home loan rewards extra payments. Putting a bonus or a part of annual savings into prepayment cuts interest every month afterwards.
Fixed or floating, and what to do when rates move
Some loans carry a fixed rate for an initial period, so read the clause on what happens after that. A floating rate falls when rates fall, which is the main reason most home loans are floating. The risk is that it rises too.
- When the benchmark rises, check whether the bank has raised the EMI or the tenor, and decide whether you want the other option.
- When the benchmark falls, confirm the cut has reached your loan at the next reset, and ask for the spread to be reviewed if your credit record has improved.
- Use prepayments to keep the tenor under control.
- Review your loan every year, using the quarterly statement.
Key takeaways
A floating rate home loan costs the benchmark plus a spread. Repo-linked loans must reset at least every three months, and the spread can change only in limited ways. The RBI requires lenders to tell you how rate changes affect your EMI and tenor, to offer you choices at reset, and to send a quarterly statement. You can switch from an older benchmark to a repo-linked rate without charges other than reasonable administrative and legal costs, if you are eligible to prepay without charges. For loans sanctioned or renewed from 1 January 2026, no pre-payment charge applies on a floating rate loan to an individual for a non-business purpose. This is general information, not personal advice.