On 7 October 2026, the Reserve Bank of India raised the repo rate by 0.25 percentage point to 5.50%. For a home loan borrower on a floating rate, a decision like this usually shows up as a message from the bank within weeks or a few months: the rate on the loan is going up, and either the EMI or the number of EMIs will rise. Savers tend to hear the opposite story, because banks often nudge fixed deposit rates higher when the policy rate rises.
The repo rate is the single number that sets off these chains. This guide explains what it is, who decides it, how a change reaches your loan and your FD, and what you can do when rates move in either direction. It uses RBI’s own statements and circulars, and examples that are clearly marked as illustrations.
What is the repo rate
RBI describes it as the interest rate at which it provides liquidity to banks and other participants under its liquidity adjustment facility, against the collateral of government and other approved securities. In plain terms, it is the price at which banks can borrow short-term money from the central bank.
Two other rates move with it. The standing deposit facility (SDF) rate, the rate RBI pays when banks park surplus money with it, sits 0.25 percentage point below it. The marginal standing facility (MSF) rate, an emergency borrowing window for banks, sits 0.25 percentage point above. The Bank Rate is aligned with the MSF rate. Together these form a corridor, with the policy rate in the middle.
| Policy rate | Level after the October 2026 MPC decision | What it does |
|---|---|---|
| Policy repo rate | 5.50% | RBI’s main signal; rate for lending to banks against securities |
| Standing deposit facility (SDF) | 5.25% | Floor of the corridor; RBI pays this on surplus funds parked overnight |
| Marginal standing facility (MSF) | 5.75% | Ceiling of the corridor; emergency overnight borrowing by banks |
| Bank Rate | 5.75% | Aligned with the MSF rate |
When RBI raises its policy rate, money becomes costlier across the banking system. Banks pay more to borrow, so they charge borrowers more, and they compete harder for deposits. When it falls, the reverse happens, though usually with a lag.
Who decides the repo rate: the MPC
Since 2016 the policy rate has been set by a six-member Monetary Policy Committee (MPC) under the RBI Act. Three members come from RBI, including the Governor, who chairs it, and the Deputy Governor in charge of monetary policy. The other three are external members appointed by the central government.
The MPC must meet at least four times a year, and in practice meets about every two months. The quorum is four members. Each member has one vote, and if votes are tied, the Governor has a casting vote. After each meeting RBI publishes a resolution with the decision, and the minutes follow about two weeks later, showing how each member voted and why.
The committee’s job is defined by law. The central government, in consultation with RBI, sets an inflation target. In its second review on 25 March 2026, the government kept the target at 4% consumer price inflation, with an upper tolerance limit of 6% and a lower limit of 2%, for April 2026 to March 2031. If average inflation stays above 6% or below 2% for three quarters in a row, RBI has to explain the failure to the government and set out what it will do.
The latest decision, in brief
At its meeting from 5 to 7 October 2026, the MPC voted unanimously to raise the repo rate by 25 basis points, from 5.25% to 5.50%. One basis point is one-hundredth of a percentage point, so 25 basis points equals 0.25 percentage point. The SDF rate moved to 5.25% and the MSF rate and Bank Rate to 5.75%.
The committee also changed its stance from neutral to “calibrated tightening”. RBI explained this means rate cuts are off the table in the near term, and the next move can only be a hike or a pause, depending on how inflation develops. Two members preferred to keep the stance neutral. RBI projected CPI inflation at 5.2% for 2026-27, pointing to a deficient monsoon, El Niño conditions and high energy prices. The next MPC meeting is scheduled for 2 to 4 December 2026.
Keep one more point in mind. RBI does not move rates to help or hurt borrowers or savers. Its aim is to keep inflation close to target while supporting growth, and every change shifts money from one group to the other for a while.
These figures will change after future meetings. Always check the latest MPC resolution on RBI’s website before acting on a rate.

How a repo rate change reaches your home loan
Before October 2019, most floating-rate loans were linked to banks’ internal benchmarks such as the MCLR or base rate, and RBI found that rate cuts reached borrowers slowly. So it told banks to link all new floating-rate personal or retail loans, such as home and auto loans, and floating-rate loans to micro and small enterprises, to an external benchmark from 1 October 2019.
A bank can choose one of these benchmarks for each loan category:
- RBI’s policy repo rate
- The 3-month Treasury Bill yield published by Financial Benchmarks India (FBIL)
- The 6-month Treasury Bill yield published by FBIL
- Any other benchmark market interest rate published by FBIL
Many banks link retail loans to the repo rate, which is why you often see the term repo-linked lending rate or external benchmark lending rate (EBLR) in loan papers. Your rate is the benchmark plus a spread. The bank decides the spread at the start. The credit risk part of the spread can change only if your credit assessment changes substantially, as agreed in the loan contract, and other parts of the spread can be changed only once in three years.
The key rule for borrowers: the interest rate under an external benchmark must be reset at least once in three months. So a policy rate change reaches an EBLR loan within a quarter, often sooner, depending on the reset dates in your agreement. Older loans still linked to MCLR or base rate move more slowly, because those internal rates are revised by banks on their own schedule.
What a 0.25 point rise means for your EMI
As an illustration, say you have a ₹50 lakh home loan with 20 years left, and assume the rate goes from 8.5% to 8.75% a year after an RBI hike. Your EMI would rise from about ₹43,391 to about ₹44,186, roughly ₹795 more each month. If you keep the EMI unchanged instead, the loan would run about a year longer.
RBI’s 2023 rules on resetting floating rates for EMI-based personal loans, which include home loans, give you choices when rates rise. Your lender must offer:
- A higher EMI, a longer tenure with the same EMI, or a mix of both
- A switch to a fixed rate for the remaining loan, as per the lender’s board-approved policy, with charges disclosed upfront
- Prepayment, in part or in full, at any time during the loan
Lenders must also tell you about any increase in EMI or tenure, and send quarterly statements showing principal and interest recovered, the EMI, the number of EMIs left and the annualised rate. You can model the options with our EMI calculator.
Tenure stretching feels painless, but it often costs more in total interest. If your budget allows, choosing a slightly higher EMI, or making a part-prepayment, usually saves money over the life of the loan.
How the repo rate affects FD rates
Deposit rates are not linked to RBI’s rate by any formula. Banks set them based on how much money they need and what competitors pay. Still, RBI’s policy aims to transmit rate changes through the entire financial system, and deposit rates usually follow the direction of the policy rate, with a lag and often by a smaller amount.
The big difference from a loan is that a fixed deposit rate is locked when you open the FD. A rate hike does not raise the rate on an FD you already hold, and a rate cut does not lower it. Only new deposits and renewals get the new rate.
As an illustration, say you are deciding between a 1-year and a 3-year FD of ₹5 lakh, and assume rates of 6.75% and 7% a year. If you expect rates to keep rising, the shorter FD lets you reinvest sooner at a better rate. If you expect cuts, locking in for longer protects your income. Since no one can predict rates reliably, many savers split the money across tenures. Our FD calculator shows how much each option earns.
What to do when the repo rate moves
When rates are rising
- Borrowers: check your loan’s benchmark and reset dates. Decide early between a higher EMI and a longer tenure, and use spare cash for part-prepayment if you have no costlier debt.
- Savers: consider shorter FDs or staggered maturities so that money comes up for renewal while rates are higher.
- New borrowers: compare the spread over the benchmark, not just today’s headline rate. The spread stays with you for years.
When rates are falling
- Borrowers: confirm your rate actually falls at the next reset. If you are still on MCLR or base rate, ask about switching to an external benchmark. Under RBI’s rules, the switch is not treated as foreclosure.
- Savers: consider locking part of your money in longer FDs before rates drop further.
Common myths about RBI rate changes
“My EMI changes the day RBI announces a decision.” Not quite. Your rate changes on the reset date set in your loan agreement, which under RBI’s rules must come at least once in three months for external benchmark loans.
“An RBI rate cut means my FD rate falls immediately.” Your existing FD keeps its rate until maturity. Only new deposits are affected.
“RBI sets the rate on my savings account.” It does not. Banks decide savings account rates themselves, and many change them far less often than FD rates. If you keep large balances idle, a sweep-in facility or a short FD may earn you more.
“Fixed-rate loans are immune.” The rate is fixed for the agreed period, but fixed-rate loans are often priced higher at the start, and some are fixed only for a few years.
Key takeaways
- The repo rate is the rate at which RBI lends to banks. After the October 2026 MPC meeting it stands at 5.50%.
- A six-member MPC sets it, aiming for 4% CPI inflation within a 2% to 6% band until March 2031.
- Repo-linked loans must reset at least once in three months, so rate changes reach your EMI within a quarter.
- When rates rise, your lender must offer a higher EMI, a longer tenure, a fixed-rate switch or prepayment.
- FD rates are locked at the start; only new deposits and renewals pick up a changed rate.